Author Topic: trouble sliding back in the cable  (Read 636 times)

Zammy

  • Newbie
  • *
  • Posts: 31
  • Reputation: 0
    • View Profile
trouble sliding back in the cable
« on: January 08, 2018, 12:19:21 AM »
 I'm having trouble sliding back in the cable  under the contact. Is there any trick to do it properly not screwing the delicate contact flat terminal?

johnbelley

  • Newbie
  • *
  • Posts: 41
  • Reputation: 0
    • View Profile
Re: trouble sliding back in the cable
« Reply #1 on: January 08, 2018, 12:19:55 AM »
I don't really know of a trick. If you make sure the locking strip that releases it is up so you can slide it under freely then you should be able to gently slide in in and lock it down with the strip.

Zammy

  • Newbie
  • *
  • Posts: 31
  • Reputation: 0
    • View Profile
Re: trouble sliding back in the cable
« Reply #2 on: January 08, 2018, 12:20:59 AM »
I don't really know of a trick. If you make sure the locking strip that releases it is up so you can slide it under freely then you should be able to gently slide in in and lock it down with the strip.

hmm okay btw That's not complicated or anything´╗┐

johnbelley

  • Newbie
  • *
  • Posts: 41
  • Reputation: 0
    • View Profile
Re: trouble sliding back in the cable
« Reply #3 on: January 08, 2018, 12:21:21 AM »
Just a little bit maybe

Zammy

  • Newbie
  • *
  • Posts: 31
  • Reputation: 0
    • View Profile
Re: trouble sliding back in the cable
« Reply #4 on: January 08, 2018, 12:21:39 AM »
hmm problem I ran into was that after I replaced my battery my power button and volume buttons will no longer work. Do you have any suggestions?´╗┐

johnbelley

  • Newbie
  • *
  • Posts: 41
  • Reputation: 0
    • View Profile
Re: trouble sliding back in the cable
« Reply #5 on: January 08, 2018, 12:22:14 AM »
I would check the connections for the power and volume button to make sure they're together right.

Zammy

  • Newbie
  • *
  • Posts: 31
  • Reputation: 0
    • View Profile
Re: trouble sliding back in the cable
« Reply #6 on: January 08, 2018, 12:22:28 AM »
I would check the connections for the power and volume button to make sure they're together right.

okay

 

Loading...