Author Topic: Nexus Device Flashing Instructions  (Read 4833 times)

androidboy

  • Administrator
  • Full Member
  • *****
  • Posts: 159
  • Reputation: 1063
    • View Profile
Nexus Device Flashing Instructions
« on: October 06, 2015, 04:16:21 PM »
To flash a device using one of the system images below (or one of your own), you need the fastboot tool. You can get the fastboot tool either:

From a compiled version of the the Android Open Source Project.

Or, from the platform-tools/ directory in the Android SDK. Be sure that you have the latest version of the Android SDK Platform-tools from the SDK Manager.

Once you have the fastboot tool, add it to your PATH environment variable (the flash-all script below must be able to find it). Also be certain that you've set up USB access for your device, as described in the Using Hardware Devices guide.

To flash a system image:

Download the appropriate system image for your device below, then unzip it to a safe directory.

Connect your device to your computer over USB.

Start the device in fastboot mode with one of the following methods:

Using the adb tool: With the device powered on, execute:

adb reboot bootloader

Using a key combo: Turn the device off, then turn it on and immediately hold down the relevant key combination for your device. For example, to put a Nexus 5 ("hammerhead") into fastboot mode, press and hold Volume Up + Volume Down + Power as the device begins booting up.

If necessary, unlock the device's bootloader by running:

fastboot oem unlock

The target device will show you a confirmation screen. (This erases all data on the target device.)

Open a terminal and navigate to the unzipped system image directory.

Execute the flash-all script. This script installs the necessary bootloader, baseband firmware(s), and operating system.

Once the script finishes, your device reboots. You should now lock the bootloader for security:

Start the device in fastboot mode again, as described above.

Execute:

fastboot oem lock

Locking bootloader will wipe the data on some devices. After locking the bootloader, if you want to flash the device again, you must run fastboot oem unlock again, which will wipe the data.

nytegeek

  • Global Moderator
  • Jr. Member
  • *****
  • Posts: 67
  • Reputation: 0
    • View Profile
Re: Nexus Device Flashing Instructions
« Reply #1 on: October 07, 2015, 01:09:16 AM »
Good walk through. I have to be honest though. I don't think most people have an actual need too flash their device. That doesn't stop an enthusiast from doing it of course. they may as well do it properly if they are going to do it.

 

Loading...